HOW DOES A DIESEL ENGINE WORK? PART10

How Does a Diesel Engine Work?

When people think of a diesel engine, they often think of a big truck which hauls a lot of items. Although diesel engines are commonly found in bigger vehicles, they can really be in any size vehicle. The benefit of a diesel engine is getting better miles per gallon. Since truck drivers are constantly on the road for most of the day, it is more economical for them to drive a diesel-powered vehicle versus a petrol-powered vehicle. The reason that diesel engines provide better gas mileage is because they have fewer revolutions per minute.

Unlike with a petrol engine, the air is the only thing that gets compressed in the chamber. This highly compressed air is then used to ignite the diesel fuel. This differs from the petrol engine which requires separate spark plugs to generate a spark for ignition. The diesel engine does not require such a spark. It relies solely on the highly compressed air to generate enough heat for a proper ignition of its fuel.

The Four Strokes of the Diesel Engine

There are two types of diesel engines; a four-stroke engine and a two-stroke engine. The typical diesel engine will have four strokes just like the petrol engine. However, the process of the strokes is different than the petrol strokes. The main difference between the two processes has to do with how the fuel is supplied and ignited.

Ironically, there was another German engineer responsible for inventing the four strokes of the diesel engine. This inventors name was Rudolph Diesel, who invented the process called the Diesel Cycle. This is a cycle that relies on a higher ratio of compression for air. The heat generated from this compressed air can get to anywhere between 400C and 800C. Sometimes the temperature will even go above this temperature. But it is necessary for the temperature to go up to this amount because if it didnt, then the diesel fuel would not be able to get ignited.


Below are the 4 strokes of the diesel engine.

  • Stroke #1  The first stroke of the Diesel Cycle is virtually identical to the petrol cycle. The inlet valve opens and lets the outside air come inside. The cylinders below receive this air because of the downward motion of the pistons that draw the air into them.
  • Stroke #2  The second stroke involves compression. After the inlet valve closes, the air becomes compressed as the pistons start to move upward. There is a small confined space in this region that allows for higher compression.
  • Stroke #3  The third stroke will involve combustion. As the air becomes highly compressed, it begins to heat up drastically. The fuel injectors will then spray the diesel fuel into the combustion chamber where all this hot compressed air is located. As soon as the fuel touches this compressed air, it will immediately ignite. The result of this ignition is heat energy which creates the power necessary to move the vehicle.
  • Stroke #4  The fourth stroke has to do with the exhaust. All the exhaust gases that were generated will be pushed out of the open exhaust valve because of the pistons. This creates the infamous black smoke which diesel vehicles are known for. This smoke will come out of the stacks and/or the tailpipe.

Conclusion

Again, there are no spark plugs to worry about for diesel engines. That might be one less piece of maintenance that youll have to worry about. On the other hand, you should still continue to maintain your engine by regularly bringing your vehicle to the auto shop for checkups. This will guarantee that you get the most life out of your diesel engine that is possible.


 

Comments

Post a Comment

Popular posts from this blog

Types of Ships. Part19

Image
Types of Ships Cargo ships are classified into various types on the basis of purpose, size, type of cargo etc. The economic factor is of prime importance in designing a merchant ship. Every owner wants maximum return on their investment which means a ships construction not only depends on the current economic necessities but the factor of future adaptability also plays a part. From the preliminary design of a vessel due for construction, the following information can be obtained: 1.      Dimensions 2.      Displacement 3.      Stability 4.      Propulsive characteristics and hull form 5.      Preliminary general arrangement 6.      Principal structural details A layout of the various ship types and their subdivisions will be listed out, covering a wide range of all vessels in operation.  The type of ship plays an important role in deciding the above mentioned parameters. Types of Ships Ships are mainly classified into the following types: 1. Container Ships 2. Bulk Carrier 3. Tanker Sh
Read more

Maintenance part17

Image
Maintenance Running checks should include: Gear box - oil level; inspect for leaks around casing; ensure pins and bolts in mechanical linkages are secure. Shaft bearings - check oil level in bearing sump; leakage through end seals; temperature of bearing. Stern gland - a leaking stern gland is a normal routine and is adjusted as a matter of course. See stern tubes in section above. Propeller shaft - check noise level to determine whether it is increasing. Regular maintenance schedules will include: Gearboxes - Adjust clutches and operating mechanism, clean filters and clean oil coolers. Drive train  Engine and shaft bearing moutings, loose shaft coupling bolts (perhaps due to mis-alignment) may need to be tightened. Mis-alignment of intermediate bearings will show up by overheating of the bearing. Survey servicing and repair schedules will include: Weardown survey- Allowance is determined by the manufacturer, but rules of thumb range from 3% of diameter as due for replacement to 6% bei
Read more

Black Smoke from the Funnel: What to do? PART24

Image
​ Black Smoke from the Funnel: What to do? Black Smoke from the funnel is a sign of poor maintenance and malfunction of the machinery. It is a serious issue as it violates Marpol 73/78 Annex VI and can lead to inspections and detention of the ship. In a ship with multiple machines the identification of the faulty unit is a difficult task. The reasons black smoke is wrong are:                                    1.       It indicates that shipkeeping and maintenance is not proper and up to the mark. 2.       It indicates the lack of competency of the engineers. 3.       It is polluting. 4.       It increases the risk of an uptake fire. Marpol Annex VI has set standards for air pollution and the sulphur content of the exhaust gases. Back smoke indicates that the combustion is incorrect. It suggests a bad fuel efficiency and an increase in the fuel consumption. Causes of Black Smoke The dark color of the smoke is caused by suspended fine carbon particles due to incomplete combustion taking
Read more