WHAT IS A SHIPS STERN TUBE? PART14

What is a Ship's Stern Tube?

Everyone knows that a ship is propelled with the help of a propeller located at the aft of the ship. However, they may not know how the propeller is connected to the engine located inside the ship. A stern tube, situated at the aft of the ship, helps in this purpose.

The propeller is the only part of ships machinery, apart from the rudder, that is located outside the ships engine room. Have you ever seen the propeller of a ship and wondered how it is connected to the inside of the ship? Have you ever wondered where the shaft holding the propeller goes when it vanishes into the ships hull? If so, then you have come to the right place.

The propeller, a part of the propulsion system of the ship, needs a power source to rotate it. A marine diesel engine located inside the ship supplies the power to the propeller. Both the diesel engine and propeller are very heavy: locating them both at the same place inside the ship would disturb the ships stability. It is for this reason a stern tube along with a propeller shaft is used.


What is a Stern Tube?

1.webp

The stern tube, as the name suggests, is a hollow tube-like structure at the stern or rear part of the ship. A ship needs a propeller to drive it forward against the waves. The propeller, located outside the ship, needs to be connected to the engine inside the ships engine room.


A long shaft known as the propeller shaft is used for connecting the ships engine and the propeller. The stern tube is a narrow hole in the hull structure at the rear end (aft peak) of the ship, through which the propeller shaft passes and connects the engine and propeller.

 Inside the Stern Tube

2.webp


The stern tube of a ship has a peculiar shape and arrangement for carrying the propeller shaft. As the shape of the ship is streamlined at the aft end, there is very little space to accommodate the propeller shaft arrangement. The stern tube is situated at the aft peak of the ships hull and the propeller shaft arrangement is also situated at the same level. The forward end of the stern tube is supported by the aft peak bulkhead and the aft end of the stern tube gets its support from the stern frame of the ship. Throughout the length, the shaft is supported by specially designed brackets and narrow floors inside the stern tube.

Stern tube Bearings and Glands

3.webp


The total weight of the propeller shaft inside the stern tube is carried by the bearings known as the stern tube. The weight of the overall stern tube arrangement, along with the bearings is carried by the stern frame and the internal framing of the ships hull structure at the aft peak area. Moreover, there are generally two bearings inside the stern tube for supporting the shaft, located at both the ends. The main function of stern tube bearings is to allow an unrestricted and smooth rotation of the propeller shaft.

Apart from stern bearings, the stern tube also houses water and oil sealing glands known as the stern glands. The stern tube is a sensitive part of the ship where the sea water can easily seep inside. The stern glands thus seal the area between the stern tube and the propeller shaft. The glands are attached at the forward end of the stern tube and prevent the passing of seawater into the ship. The glands also prevent the leaking of oil from the stern bearings into the sea.

Seawater Lubricated Stern Tube Bearings

Editor's Note: Thordon Bearings, Inc. contacted us to say we should include information on Seawater Lubricated, a method that is recommended by the EPA. As we were not familiar with this method, they graciously provided the following content and illustration to supplement this article.


4.webp

Prior to the 1950s, propeller shafts operated in water lubricated lignum vitae (a dense wood) bearings and used stuffing boxes as seals at the hull penetrations. The bearings however required regular replacement and the packings then available for the stuffing boxes were not ideal.

With increased environmental awareness and new legislation, there has been a return to seawater lubricated stern tube bearing systems. Improvements in water lubricated material technologies have resulted in greater choice of materials which can now offer improved and predictable bearing wear life with zero risk of oil pollution from the stern tube.

A seawater lubricated open system uses seawater as the lubrication medium in place of oil. The seawater is taken from the sea, pumped through non-metallic shaft bearings and returns to the sea. No stern tube oil is needed. There is no aft seal; only a forward seal to prevent seawater from entering into the engine room. Proven materials and new designs of non-metallic bearings now offer performance similar to metal shaft bearings.

 

Comments

Post a Comment

Popular posts from this blog

Types of Ships. Part19

Image
Types of Ships Cargo ships are classified into various types on the basis of purpose, size, type of cargo etc. The economic factor is of prime importance in designing a merchant ship. Every owner wants maximum return on their investment which means a ships construction not only depends on the current economic necessities but the factor of future adaptability also plays a part. From the preliminary design of a vessel due for construction, the following information can be obtained: 1.      Dimensions 2.      Displacement 3.      Stability 4.      Propulsive characteristics and hull form 5.      Preliminary general arrangement 6.      Principal structural details A layout of the various ship types and their subdivisions will be listed out, covering a wide range of all vessels in operation.  The type of ship plays an important role in deciding the above mentioned parameters. Types of Ships Ships are mainly classified into the following types: 1. Container Ships 2. Bulk Carrier 3. Tanker Sh
Read more

Maintenance part17

Image
Maintenance Running checks should include: Gear box - oil level; inspect for leaks around casing; ensure pins and bolts in mechanical linkages are secure. Shaft bearings - check oil level in bearing sump; leakage through end seals; temperature of bearing. Stern gland - a leaking stern gland is a normal routine and is adjusted as a matter of course. See stern tubes in section above. Propeller shaft - check noise level to determine whether it is increasing. Regular maintenance schedules will include: Gearboxes - Adjust clutches and operating mechanism, clean filters and clean oil coolers. Drive train  Engine and shaft bearing moutings, loose shaft coupling bolts (perhaps due to mis-alignment) may need to be tightened. Mis-alignment of intermediate bearings will show up by overheating of the bearing. Survey servicing and repair schedules will include: Weardown survey- Allowance is determined by the manufacturer, but rules of thumb range from 3% of diameter as due for replacement to 6% bei
Read more

Black Smoke from the Funnel: What to do? PART24

Image
​ Black Smoke from the Funnel: What to do? Black Smoke from the funnel is a sign of poor maintenance and malfunction of the machinery. It is a serious issue as it violates Marpol 73/78 Annex VI and can lead to inspections and detention of the ship. In a ship with multiple machines the identification of the faulty unit is a difficult task. The reasons black smoke is wrong are:                                    1.       It indicates that shipkeeping and maintenance is not proper and up to the mark. 2.       It indicates the lack of competency of the engineers. 3.       It is polluting. 4.       It increases the risk of an uptake fire. Marpol Annex VI has set standards for air pollution and the sulphur content of the exhaust gases. Back smoke indicates that the combustion is incorrect. It suggests a bad fuel efficiency and an increase in the fuel consumption. Causes of Black Smoke The dark color of the smoke is caused by suspended fine carbon particles due to incomplete combustion taking
Read more